imagistics 1630 Operating Manual page 76

Transmission Verification Job Status Rpt.
You can use the Job Status Rpt. as proof that you sent a fax. This report
lists the time and date of transmission, and whether the transmission was
successful.
When the feature is OFF, the report is printed automatically only if an
error occurred during transmission. If the report indicates NG, send the
document again. If the report indicates you should check the readability
of certain pages, resend those pages.
If you typically send multiple faxes to the same destinations, you may
need a reminder to identify each fax transmission. You can select
OFF+IMAGE or ON+IMAGE to print a portion of the first page of the fax
message on the report.
1
Press ,
Features
2
Press or
.
Enter/Yes
3
Press to exit.
Stop
When the machine is idle, you can print the Transmission Verification
Report by pressing
transmission was successful or not.
Journal Interval
You can set the machine to print the Journal at specific intervals
(6, 12, 24 hours, 2, 4 or 7 days). If you set the interval to OFF, you can
print the report by following the steps in the previous section.
1
Press ,
Features
2
Press or
and press
Enter/Yes
3
Press or
(If you choose 7 days, the screen prompts you to choose a day at which to
begin the 7-day countdown.)
4
Enter the time to begin printing, in 24-hour format and press
(For example: enter 19:45 for 7:45 PM.)
5
Press to exit.
Stop
10 - 2 P R I N T I N G
, , .
1 1
7
to select INC, INC+IMAGE, ON or ON+IMAGE and press
when you wish to confirm if the last
Last Comm.
, , .
1
7 2
to display INTERVAL?
.
to choose your setting and press
R E P O R T S
.
Enter/Yes
Enter/Yes
.