Registering your Unique Ring Pattern
If you are not sure which ring pattern you have, call your telephone
company. Then assign that pattern in the steps below.
1
Set the machine to MANUAL mode.
2
Press
,
Features
The screen displays the current setting of this feature.
3
Press
or
4
Press
when the screen displays UNIQUE RING:SET?
Enter/Yes
5
Press
or
Enter/Yes
press
. (You will hear each pattern as you scroll through the four
patterns. Be sure to choose the pattern assigned by the Telephone
Company.)
6
Press
Stop
to exit.
Once you've registered the Unique Ring pattern in your machine, you can
turn this feature on or off. To change the setting, follow steps 1 to 4
above, selecting ON (or OFF).
After you're sure you've set up Unique Ring properly and it is working,
you can reconnect a TAM or have Voice Mail turned back on.
5 - 12
R E C E I V E S E T T I N G S
,
,
.
1
1
0
to select the SET Mode.
to select the prestored ring pattern you want to assign and
Ring
Pattern
Rings
1
long - long
2
short - long - short
3
short - short - long
4
very long (normal pattern)