Setting Up Polling Transmit - imagistics 1630 Operating Manual

Setting Up Polling Transmit

Polling Transmit is when you set up your machine to wait with a document
so another fax machine can retrieve it. (See Interrupting Delayed Send and
Polling Transmit Jobs on this page.)
1
Place the document to be retrieved in the feeder.
2
Press ,
Features 1
3
Press or to choose
POLL TX:ON? and press
4
Press to select DOC if you want your
1
machine to scan the printed document at
the time it is polled—OR—Press
5
Press if you want to select additional settings. The display returns to
1
the TX SETTINGS menu—OR—Press
settings and go to step 6.
6
Press .
Send/Receive
If you pressed
feeder until your machine is polled. However, you can "interrupt" it to
send another fax.
Interrupting Delayed Send and Polling Transmit
Jobs
You can send a fax or make a copy now, even if you have the machine set
to send a fax later or to be polled. However, you cannot use automatic
redial or the Feature mode. (See Delayed Send, page 6-10 and Setting Up
Polling Transmit on this page.)
1
Press ,
Features 1
2
Wait 2 seconds, then remove the documents that are waiting in the
feeder.
3
Place the "new" document you want to
send now in the feeder.
4
Enter the new fax number for the documents you want to send now.
5
Press .
Send/Receive
6
After the transmission is finished, place the "old" documents back into the
feeder.
7
To restore the Delayed Send and/or Polling.
Press Features , 1
, , .
3 8
.
Enter/Yes
in Step 4, the printed document remains in the document
1
, .
5
, .
5
to select MEMORY.
2
if you are finished choosing
2
T X S E T T I N G S 6 - 13