Table of Contents
Advertisement
Changing R R Passcode
Enter your R R Passcode when the machine picks up your call, so you can
access features remotely. The access code is preset to 1 5 9
can change this. The
1
Press
,
Features
2
Enter a three-digit number from 000 to 999 and press
(Do not use the same digits that appear in your Fax Receive Code or
Telephone Answer Code.)
3
Press
to exit.
Stop
Remote Retrieval
You can call your machine from any fax machine using touch tone and use
a R R Passcode and other button presses to retrieve fax messages. Cut out
the R R Passcode on the last page and keep it in your wallet as an aid.
Using R R Passcode
1
Dial your fax number from a fax machine using touch tone.
(See Changing R R Passcode on this page.)
2
When your machine answers and beeps, immediately enter your R R
Passcode (1 5 9
3
Your machine signals the kinds of messages received:
1 long beep — Fax message(s)
No long beeps — No messages
4
Your machine then prompts you with two short beeps to enter a command.
If you wait longer than 30 seconds to enter a command, your machine
hangs up. If you enter an invalid command, your machine beeps three
times.
5
Press
to reset your machine when you're finished.
9
0
6
Hang up.
If your machine is set to Manual mode, you can access your machine by
waiting about 2 minutes, then entering the R R Passcode within 30
seconds.
cannot be changed.
,
,
.
1
8
3
).
R E M O T E
F A X
, but you
.
Enter/Yes
O P T I O N S
9 - 3
Advertisement
Table of Contents
