Canceling A Job While Scanning The Document - imagistics 1630 Operating Manual

Contrast
If your document is very light or very dark, you might want to set the
contrast. Use S.LIGHT to send a very light document. Use S.DARK to
send a very dark document.
1
Insert the document, face down, in the feeder.
2
Press ,
Features
3
Use or to select AUTO, S.LIGHT or S.DARK and press
4
Press if you want to select additional settings.The display returns to the
1
TX SETTINGS menu.—OR—Press
settings, and go to step 5.
5
Enter a fax number and press
Mode
When you have a document in the feeder, you can use the
change the default setting. Press
change to the setting you want. For standard, turn Fine & Extra Fine
lights off. For Photo, turn them both on. (See Multiple Resolution
Transmission, page 6-12.)
Standard—Suitable for most typed documents.
Fine—Good for small print; transmits a little slower than standard
resolution.
Extra Fine—Good for small print or artwork; transmits slower than fine
resolution.
Photo—Use when document has varying shades of gray; slowest
transmission time.

Canceling a Job While Scanning the Document

You can cancel a job while you are scanning it into memory by pressing
. Eject the document by pressing
Stop
6 - 8 T X S E T T I N G S
, , .
1
3 3
Send/Receive
if you are finished choosing
2
to send a fax.
continuously until you see the lights
Mode
again.
Stop
.
Enter/Yes
key to
Mode