Dialling Mode Setting; Flash Time Setting - Geemarc ClearSound Amplidect COMBI355 User Manual

Dialling Mode Setting

In the UK, all telephone exchanges now use Tone dialing. If your
telephone does not dial out, it is probably being used from an
older private switch- board (PBX). In this case, the Tone/Pulse
setting must be changed to Pulse.
Press 'MENU' soft key to activate the menu
Use and
Use and
Use and

Flash Time Setting

You can adjust the flash time setting. There are two options
available. Your telephone works with a flash time for United
Kingdom (R=100ms).
Press 'MENU' soft key to acivate the menu
BASE SETTINGS
to scroll through the menu to select
'BS SETTINGS'
Press (left side) to select
to scroll through the menu to select
'DIAL MODE'
Press (left side) to select
to scroll through the menu to select
either
'TONE' or 'PULSE'
Press (left side) to save
49