Table of Contents
Advertisement
Dialling Mode
The Tone/Pulse is factory pre-set to Tone (Tone). In the US, all telephone
exchanges now use Tone dialling. If your phone does not dial out, it is
probably being used from an older private switch-board (PBX). In this case,
theTone/Pulse setting must be moved to Pulse (Pulse).
12
SETTINGS
Press MUTE
▲ or ▼
Use
to select 'SET PHONE'
Press OK
▲ or ▼
Use
to select 'TONE /PULSE'
Press OK
Select 'TONE'or'PULSE'
Press OK to confirm
Press C three times to exit
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
