Geemarc ClearSound Amplidect COMBI355 User Manual page 22

INSTALLATION (HANDSET)
Install the rechargeable batteries in the handset. The handset
requires three Nickel Metal Hydride (NiMH) AAA batteries.
These are supplied with your telephone. Slide the battery cover
in the direction of the arrow and pull it out. Check the battery
polarity diagrams on the handset when inserting the batteries. Fit
the battery cover by sliding the cover on to the back of the
handset until it snaps shut.
Place the handset on the base, a short beep will be heard. The
battery symbol
handset is fully charged, the display will show a full battery symbol.
The telephone has an automatic charging control to avoid
excessive charging.
Before the handset can be used, the handset batteries must
be charged for a minimum of 15 hours on the AMPLIDECT
COMBI355 base.
(*) Classified "hazardous voltage" according to EN60950 standard
(**) Classified TNV-3 according to EN60950 standard.
will be displayed on the handset. Once the
1 3
2
4 6
5
7 9
8
0
19
TM