Announce 1 And Announce 2; Record Announce 1 - Geemarc ClearSound Amplidect COMBI355 User Manual

ANSWERING MACHINE

Announce 1 and Announce 2

Before you use the answering machine you should record an
outgoing message. There is an answer and record message
(Announce 1) and an answer only message (Announce 2).
These outgoing messages are your messages to an incoming
caller and may be up to 3 minutes in length.

Record Announce 1

Announce 1 is a conventional outgoing message, requesting the
caller to leave a message. The default outgoing message is
"Hello, your call cannot be taken at the moment, to record your
message, please speak after the tone". If you prefer, you can
record your own outgoing message.
Press 'TAM' soft key to activate the answering machine
Press 'SELECT' soft key to choose 'ANNOUNCE'
Press 'SELECT' soft key to choose 'ANNOUNCE1'
CORDLESS HANDSET: On hearing the tone, record
your personal outgoing message. When you have
finished speaking press the 'OK' soft key. If you speak
for longer than 3 minutes, recording will stop
automatically. Whilst recording the LCD will show
'RECORDING' The new OGM will be played after
BASE: On hearing the tone, record your personal
Press to 'RECORD'
Press 'SELECT' soft key
recording
87