Dialling Mode Setting; Setting Date And Time - Geemarc Ampli455 User Manual

Dialling Mode Setting

In the UK, all telephone exchanges now use Tone dialing. If your
telephone does not dial out, it is probably being used from an
older private switch- board (PBX). In this case, the Tone/Pulse
setting must be changed to Pulse.
Use
Use and
Use and
Press

Setting Date and Time

In standby mode, the telephone displays the current date and time.
You need to set the date and time so that when you receive calls
they will appear in the call list with the correct date and time. If
you subscribe to a Caller ID service, the time and date will be set
automatically when you receive your first call.
Use and
SETTINGS SETTINGS
Press 'MENU'
and to select
'SELECT'
Press
to select 'DIALLING MODE'
'SELECT'
Press
to select either
'SELECT' soft key to confirm
Press 'MENU'
to select 'DATE AND TIME'
'SELECT'
Press
20
soft key
'SET PHONE'
soft key
soft key
'TONE' 'PULSE'
or
soft key
soft key