Hands Free; Speakerphone Volume Setting - Geemarc ClearSound Amplidect COMBI355 User Manual

USING THE TELEPHONE (BASE)

Hands Free

Receiving a call – Hands Free
Press to speak hands free
To end the call press
Making a Call – Hands Free
Press the button to get a dialling tone then dial the telephone
number on the keypad. The icon appears on the LCD. To
end the call, simply press again. The icon will
disappear.
To activate the Hands Free function during the call, press the
button and replace the handset on the cradle at the same time.
To deactivate the Hands Free function during a call, lift the
handset.
Note: When in hands free mode, only one person may talk at a
time. The switch-over between speaker and microphone is
automatic. This is dependent on the sound level of the incoming
call and the microphone respectively. It is therefore essential
that there are no loud noises, e.g. music, in the immediate vicinity
of the telephone, as this will disrupt the hands free function.

Speakerphone Volume Setting

In hands free mode you can adjust the speaker volume by using
the volume controls + or - located on the base unit of the
phone.
61