Additional Handsets & Bases; Register A New Handset - Geemarc ClearSound Amplidect COMBI355 User Manual

Amplified big button telephone and answering machinr & amplified digital cordless telephone

Table of Contents

ADDITIONAL HANDSETS & BASES

The handset that came with your base is already registered to the

base (factory setting). This is registered as handset 1. Each

additional handset you purchase must be registered to the base.

Up to 5 handsets can be registered to one base unit. This means

you can make internal calls between registered handsets, transfer

an incoming call between handsets and answer a call anywhere in

the office/home at any time as all the handsets will call at the

same time.

You can also register up to 4 base units to each handset. This

will increase the phone range, allowing you to move between the

telephone coverage areas.

Before registering a handset to the base, you should press and

hold the

key on the front panel of the base for about 5

seconds and then release it. The rest of the registration process

for a handset takes place via the handset.

Press 'MENU' soft key to activate the menu

Use

and

to scroll through the menu to select

'REGISTRATION'

Press

(left side) to select

Use

and

to scroll through the base names list

Press

(left side) to select desired base.

The

handset will search for the requested base and the

relevant information will flash on the LCD.

Table of Contents

Show Quick Links

Table of Contents