Dialling Mode Setting; Flash Time Setting - Geemarc ClearSound Amplidect COMBI355 User Manual

BASE SETTINGS FROM HANDSET

Dialling Mode Setting

In the UK, all telephone exchanges now use Tone dialing. If your telephone
does not dial out, it is probably being used from an older private switch- board
(PBX). In this case, the Tone/Pulse setting must be changed to Pulse.
Press 'MENU' soft key to acivate the menu
Use and
Use and
Use and
Press
return to standby or wait 30 seconds

Flash Time Setting

You can adjust the flash time setting. There are two options
available. Your telephone works with a flash time for United
Kingdom (R=100ms).
Press 'MENU' soft key to acivate the menu
to scroll through the menu to select
'BS SETTINGS'
Press (left side) to select
to scroll through the menu to select
'DIAL MODE'
Press (left side) to select
to scroll through the menu to select
either
'TONE' or 'PULSE'
(left side) to save. Either press
37
to