Installation (Handset); Location; Setting Up; Handset Range - Geemarc ClearSound Amplidect COMBI355 User Manual

INSTALLATION (HANDSET)

Location

Ensure you situate the telephone close enough to the power
socket so that the cable will reach safely without stretching. Also,
the mains power needs to be easily accessible in case you need
to disconnect the power.
Make sure the telephone is at least 1 metre away from other
electrical products e.g.TV, radio and monitors so as to avoid
interference. Also, avoid direct heat and sunlight.
We advise you to place the telephone on a table cloth or similar,
as the rubber feet on the base can mark some surfaces

Handset Range

The telephone has a range of 30-50 metres indoors and up to 300
metres outdoors. The range will be reduced when there is no
clear line of sight between the base and handset. Place the base
as high as practically possible to ensure the best signal between
the base and the handset. The icon at the top left of the
LCD display will blink and the signal strength bars will disappear
to warn you if you have moved out of range of the base. You will
need to move closer to the base station as the telephone line
might be disconnected and the handset will return to standby.

Setting Up

Plug the power cable into the power socket on the base. Plug
the adaptor end of the power cable into the mains supply and
switch the supply on. (*)
To AC wall outlet
18