Turning The Power On - Canon Laser Class 700 Series Reference Manual

Turning the Power ON

1
1
2
1-50 Assembling the Machine
CF-PL Reference Guide_USEN HT1-2187-000-V.1.0
Connect the power cord to the power socket on the back of
the main unit.
Connect the other end of the power cord to the power source.
After you connect the power cord to the power source, the LCD display turns ON.
CAUTION
The machine must be connected to a properly grounded, three-prong 120 V
AC outlet.
NOTE
• There is no power switch on the main unit.
• The message below appears while it takes a few seconds for the machine to warm
up.
• The machine has warmed up and is ready to use when you see the date and time
displayed. Now the machine is in the Standby mode.