Returning To The Full Power Mode - Canon Laser Class 700 Series Reference Manual

6
1 2 3
4 5 6
7 8 9
0
Set
2
7
Stop

Returning to the Full Power Mode

When the machine is in the Energy Saver mode, the Energy Saver indicator lights
in green.
To restore the Full Power mode, press [Energy Saver]. While the machine is
powering up, the message <PLEASE WAIT> is displayed for a few seconds.
The following actions automatically restores the Full Power mode:
• Receiving a document
• Printing an Activity Management report preset for printing
• Answering a call
• Dialing another machine to perform preset polling
You can awaken the machine from the low energy sleep mode by:
• Pressing [Energy Saver]
• Placing an original on the machine for sending or copying
2-38 Using the Energy Saver Mode
CF-PL Reference Guide_USEN HT1-2187-000-V.1.0
Enter a number for the time (from 03 to 30 minutes) using the
numeric keys that you want the machine to remain idle before
it automatically enters the low energy sleep mode © press
[Set].
You can also press [M] or [L] to specify the time.
Press [Stop] to return to the Standby mode.
After the machine enters the Energy Saver mode, only the Energy Saver indicator
on the operation panel remains lit in green, while the LCD display is turned off.
NOTE
To enter the Energy Saver mode manually, press
©
(Energy Saver).