Scanner Installation
1) Remove the 2 Scanner System Fixation Screws.
NOTE:
Be sure to keep the Scanner System Fixation Screws in a safe place for moving the
machine.
x2
Setting the Environment Heater Switch
1) ON the Environment Switch
9
Installation > Installation Procedure > Turning OFF the Main Power
Turning ON the Power
1) Connect the power plug to the outlet.
2) Remove the Protection Sheet on the Control Panel.
3) Turn ON the main power switch.
NOTE:
•
•
•
4) Execute the following service mode to make the Cassette Heater recognized. In service
mode,
Select COPIER > OPTION > USER > CSTHT-SW > "1".
5) In service mode > COPIER > OPTION > CST , check that the value appropriate for the
location is selected for CST-K-SW. (0:EXEC , 1:16K )
Turning OFF the Main Power
1) Open the Switch Cover and turn OFF the main power switch.
F-9-15
2) Check that the control panel display and the main power lamp are OFF, and then
disconnect the power plug.
F-9-16
9
Installation > Installation Procedure > Turning OFF the Main Power
Toner supply and initialization of the Developing Assembly and the Drum are automatically
performed.
When toner supply is completed, the operation stops. (Approx. 4 minutes)
It is possible to perform "Installing the Others", "Securing the Host Machine", and "Setting
the Cassette" while supplying toner.
9-10
9-10