Attaching the Document Output Tray
\
Document Output Tray
IMPORTANT
Make sure the knobs on each side of the tray fit into the holes on each side of the
main unit. The back of the tray sits on top of the extended lip of the main unit.
Attaching the Document Feeder Tray
NOTE
Remove the tape on the back of the tray before attaching it to the main unit.
1
Slide one side into position first, then the other side.
CF-PL Reference Guide_USEN HT1-2187-000-V.1.0
2
1
Assembling the Machine
1
Extended Lip
1-39