7
Stop
Press [Stop] to return to the Standby mode.
NOTE
To turn the restriction 'OFF' again, repeat this procedure from step 1, and select
'OFF'.
Operating the Machine with Restrictions ON
This section describes how to operate the machine with the operation restriction
features set up and turned 'ON'.
1
1
2
3
If you see the message <ENTER DEPT. ID> when the machine
4
5
6
is in Standby mode, the restriction is turned 'ON'. Enter the
7
8
9
Department ID using the numeric keys © press [Set].
0
Set
2
1
2
3
If the message <DEPT. ID PASSWORD> is displayed, enter the
4
5
6
department password using the numeric keys © press [Set].
7
8
9
0
Set
NOTE
The sender name will appear on the LCD display only when you have set a sender
name in the SELECT SENDER menu. (See page 4-9.)
3
Continue operating the machine.
CF-PL Reference Guide_USEN HT1-2187-000-V.1.0
©
©
Restricting Machine Operation
4
4-13