Power; Operating Environment - Canon Laser Class 700 Series Reference Manual

Item
Data Compression
System
Transmission Time
Scanning Line Density
Toner Cartridge
*1 Based on CCITT/ITU-T No. 1 Chart (Standard Mode).
*2 JBIG is a new ITU-T standard image data compression method. JBIG's compression method allows data to be
compressed more efficiently than MMR, a conventional compression method. JBIG is especially effective when
transmitting halftone image documents. The smaller data size requires less transmission time, thereby saving you
time and money.
*3 Approximately 3 seconds per page is the fax transmission time based on CCITT/ITU-T No.1 Chart, (JBIG or
Standard Mode) at 33.6 Kbps modem speed.

Power

Item
Power Source
Battery Backup
Power Consumption

Operating Environment

Item
Temperature
Humidity
CF-PL Reference Guide_USEN HT1-2187-000-V.1.0
Specification
MH (Modified Huffman), MR (Modified READ), MMR
(Modified Modified READ), and JBIG
experts Group)
G3 Mode:
V.34 + JBIG: Approximately 3 seconds
ECM - MMR: Approximately 6 seconds/page
MR Standard Mode: Approximately 12 seconds/page
MH Standard Mode: Approximately 15 seconds/page
G3 Mode:
Standard: 8 dots/mm x 3.85 lines/mm
Fine: 8 dots/mm x 7.7 lines/mm
Super Fine: 8 dots/mm x 15.4 lines/mm
Ultra Fine: 16 dots/mm x 15.4 lines/mm (interpolated)
Canon FX7 Toner Cartridge
Specification
120 V/60 Hz
12 hours (This length of time will become shorter through
repeated charging and discharging of the backup battery, or
if you install the optional memory.)
Standby mode: Approximately 15 W at 77°F (25°C)
Operation: Approximately 480 W; approximately
980 W max.
Energy Saver mode: Approximately 5 W
Specification
50°F to 90.5°F (10°C to 32.5°C)
20% to 80% RH (Relative Humidity)
*2
(Joint Bi-level Image
*3 *1
/page
*1
*1
*1
Specifications 8-3
8