Chapter 3 Getting Acquainted; Basic Transceiver Modes - Kenwood TM-G707 Instruction Manual

1

BASIC TRANSCEIVER MODES

2
3 This section introduces you to the basic modes you can
select.
4
5
VFO mode
6
Press [VFO] to select. In this mode you can change the
operating frequency using the Tuning control or Mic
7
[UP]/ [DWN].
8
9
10
11
12
13
Memory Recall mode
14
Press [MR] to select. In this mode you can change
15
memory channels, using the Tuning control or Mic [UP]/
16
[DWN], where you stored frequencies and related data.
For further information, refer to "MEMORY CHANNELS"
17
{page 27}.
18
19
20
21
22
8
GETTING ACQUAINTED
Programmable Memory (PM) mode
Press [PM] to select. In this mode you can select the
transceiver environment, by pressing [1] to [4] , that you
stored in PM channels {page 36}.
Menu mode
Press [MNU] to select. In this mode you can change
Menu Nos. using the Tuning control or Mic [UP]/ [DWN].
For further information, refer to "MENU SET-UP"
{page 19}.