MEMORY ➡ VFO TRANSFERS
1
Transferring the contents of a memory channel or the
Call channel to the VFO can be useful if you want to
2
search for other stations or a clear frequency, near the
3
selected memory channel or Call channel frequency.
4
1 Recall the desired memory channel or the Call
5
channel.
6
2 Press [F] , [VFO].
7
• The entire contents of the memory channel or the Call
channel are copied to the VFO. VFO mode is selected
8
after the transfer is completed.
9
Note:
10
◆
A transmit frequency from an odd-split memory channel or odd-split
Call channel is not transferred to the VFO. To transfer a transmit
11
frequency, press
, then press
[REV]
◆
Lockout status and memory names are not copied from a memory
12
channel to the VFO.
13
14
15
16
17
18
19
20
21
22
32
,
.
[F]
[VFO]
CHANNEL DISPLAY FUNCTION
When this function is switched ON, the transceiver
displays only a memory channel number instead of a
frequency.
Press [LOW] +[ ] to switch this function ON (or OFF).
When in Channel Display mode, you cannot use the
following functions:
• VFO Select
• Programmable Memory
Recall
• Memory Channel Store
• Memory ➞ VFO Transfer
• Freq. Step Size Change
• Easy Operation Select
• Programmable Memory
Reset
Note:
◆
You cannot switch this function ON if you have stored frequencies in
no memory channels.
◆
When in Channel Display mode, you may want to recall only memory
channels of the desired band. Before pressing
"ONE" in Menu No. 4 (MR), then select the desired band.
2
1
• MHz Function Select
• Programmable Memory
Store
• Call Channel Store
• Memory Channel Clear
• VFO Scan
• Partial/ Full reset
[LOW]+[ ]
, select