PROGRAM SCAN
1
Program Scan is identical with VFO Scan except that
you select the frequency range of the scan.
2
3
4
1 s
5
6
7
8
■
Setting Scan Limits
9
You can store up to 6 scan ranges in memory
10
channels L1/U1 to L6/U6.
11
1 Select the desired band.
12
2 Select the desired frequency as the lower limit.
13
3 Press [F] .
14
4 Select a channel in the range from L1 to L6.
15
16
17
18
19
20
5 Press [MR].
21
• The lower limit is stored in the channel.
22
6 Select the desired frequency as the upper limit.
7 Press [F] .
42
8 Select a matching channel in the range from U1 to
U6.
• If you have selected, for example, L3 in step 4,
select U3.
9 Press [MR].
• The upper limit is stored in the channel.
10 To confirm the stored scan limits, press [MR], then
select the L and U channels.
Note:
◆
The lower limit must be lower in frequency than the upper limit.
◆
The lower and upper frequency steps must be equal.
◆
The lower and upper limits must be selected on the same band.