Selecting Frequencies; Tuning Control; Microphone [Up]/ [Dwn] Buttons - Kenwood TM-G707 Instruction Manual

Kenwood mobile transceiver instruction manual
Table of Contents

Advertisement

SELECTING FREQUENCIES

1

Tuning Control

2
Using the Tuning control is convenient when you are
3
within easy reach of the transceiver front panel, and
4
the frequencies to be selected are near the current
frequency.
5
1 Press [VFO] to select VFO mode.
6
7
8
9
10
11
2 Turn the Tuning control clockwise to increase the
12
frequency or counterclockwise to decrease the
frequency.
13
14
15
16
17
18
• You can also select frequencies via the microphone
keypad (MC-53DM only). See "KEYPAD DIRECT
19
ENTRY" {page 54}.
20
• To change frequencies in steps of 1 MHz, press
[MHz] first. Pressing [MHz] again cancels the
21
1 MHz function.
22
16
• To change frequencies in steps of 10 MHz, press
[F] +[MHz] first; do not press [F] for longer than
1 second. Pressing [F] cancels the 10 MHz function;
pressing [MHz] starts the 1 MHz function.
If you cannot select a particular frequency, you need to
Note:
change the frequency step size. See "CHANGING FREQUENCY
STEP SIZE" {page 55} for further information.

Microphone [UP]/ [DWN] Buttons

Using Mic [UP]/ [DWN] for frequency selection is
useful when mobiling or any time you are not
immediately in front of the transceiver.
Press Mic [UP] or [DWN] once to change the
frequency by one step in the direction indicated by
the button.
• Pressing and holding the button causes the frequency to
step repeatedly. Release it to stop the frequency
change.
• To change frequencies in steps of 1 MHz (or 10 MHz),
press [MHz] (or [F] +[MHz]) first.
MC-53DM

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tm-g707aTm-g707e

Table of Contents