Power Supply Shield Removal - Lexmark MS510 Series Service Manual

5
Remove the five metal screws (C) and the plastic screw (D) securing the power supply.
6
Remove the power supply, and then disconnect the cable from the power supply.

Power supply shield removal

1
Remove the left cover. See
2
Remove the rear door and cover. See
3
Remove the power supply. See
4
Position the printer so that it sits on its right side.
A
"Left cover removal" on page
"Rear door and cover removal" on page
"Power supply removal" on page
Repair information
225
B
166.
240.
223.
4514-630, -635, -636