Power Supply Shield Removal - Lexmark MS310 Series Service Manual

6
Remove the five metal screws (D) and the plastic screw (E) securing the power supply.
7
Remove the power supply, and then disconnect all cables from the power supply.

Power supply shield removal

1
Remove the left cover. See
2
Remove the rear door and cover. See
3
Remove the power supply. See
4
Position the printer so that it sits on its right side.
D
"Left cover removal" on page
"Rear door and cover removal" on page
"Power supply removal" on page
Repair information
191
E
144.
206.
190.
4514-220, -230