Mac Clone; Alg Settings - TP-Link Archer D9 User Manual

Archer D9 AC1900 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
4.5.5

MAC Clone

Choose menu "Network""MAC Clone", you can configure the MAC address of the WAN
Interface as shown below.
The WAN Interface List displays the WAN Interfaces you have configured on the section
WAN Settings and its default MAC Address. You can select the corresponding WAN Interface from
the drop-down list and click Clone MAC To button to clone your current PC MAC, and then click
Save.

Note:
Only the WAN Ports can use MAC Address Clone function. All the clone MAC addresses must not
be the same with each other.
4.5.6

ALG Settings

Choose menu "Network""ALG Settings", and then you can configure the basic security in the
screen as shown in Figure 4-19.
Virtual Private Network (VPN): VPN Pass-through must be enabled if you want to allow VPN

tunnels using VPN protocols to pass through the modem router.
PPTP Pass-through:
•
Point-to-Point Protocol (PPP) to be tunneled through an IP network. To allow PPTP
tunnels to pass through the modem router, click Enable.
Figure 4-18
Figure 4-19
PPTP (Point-to-Point
32
Tunneling Protocol)
4.5.1
allows the