Print Server; Route Settings - TP-Link Archer D9 User Manual

Archer D9 AC1900 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
b) Enter the name of the share folder in Share Name field.
c) Click the Apply button to apply the configuration.
Click the Scan now to scan all the share folders immediately. You can also select the Auto-scan,
and, at the same time, select an auto scan interval time from the drop-down list. In this case, the
media server will automatically scan the share folders.

Note:
The max share folders number is 6. If you want share a new folder when the numbers has been
reached to be 6, you can delete a share folder and then add a new one.

4.11.6 Print Server

Choose menu "USB Settings"→ "Print Server", you can configure print server on this page as
shown below.
There are three states of the print server, they are as follows:
Online: Indicates the print server has been turned on, and no user is using the print services

at present. You can click the Stop button to stop the print service.
Offline: Indicates the print service feature is disabled. You can click Start button to start the

print service.
Busy: Indicates the print service is occupied by other users at this moment.


4.12 Route Settings

Choose "Route Settings", it includes three menus: Default Gateway, Static Route and RIP
Settings. The detailed descriptions are provided below.
Figure 4-64
Figure 4-65
73