Interface Grouping - TP-Link Archer D9 User Manual

Archer D9 AC1900 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide

Note:
After you finish the Internet configuration, please click Save to make the settings take effect.
4.5.2

Interface Grouping

Choose "Network""Interface Grouping", you can view all the current groups on this page
(shown in Figure 4-11).
Enable the Virtual LAN Ports feature: Virtual LAN (VLAN) is a group of devices on one or

more LANs that are configured so that they can communicate as if they were attached to the
same LAN. Because VLANs are based on logical instead of physical connections, it is very
flexible for user/host management, bandwidth allocation and resource optimization. If you
want to active the Interface Grouping function, please check the box to enable the Virtual LAN
Ports feature.

Note:
It is not allowed to disable the VLAN with Ethernet Connection enabled.
To support this feature, you must create mapping groups with appropriate LAN and WAN
interfaces using the Add button.
Click the Add button. You can add a new interface group in the next screen. For example, if you
want LAN1 and LAN3 to be a group called Group 1 over br_8_35_0 WAN interface, you can refer
to the following figure.
Figure 4-11
28