Ipv6 Static Route - TP-Link Archer D9 User Manual

Archer D9 AC1900 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
Click the Add Interface button, you can add WAN Interfaces.
Click the Save button to save your settings.

4.13.2 IPv6 Static Route

Choose "IPv6 Route Settings" "IPv6 Static Route". You can see the IPv6 Static Route screen.
This screen allows you to configure the IPv6 static routes (shown in Figure 4-71). An IPv6 static
route is a pre-determined path that network information must travel to reach a specific host or
network.
To add a new entry, follow the instructions below.
1. Click the Add New button in Figure 4-71, and you will see the screen as shown in Figure
4-72.
2. Enter the following data:
Destination IPv6 Address: The IPv6 address of the network or host that you want to assign

to a static route.
Figure 4-70
Figure 4-71
Figure 4-72
76