Guest Network; Basic Settings 2.4Ghz - TP-Link Archer D9 User Manual

Archer D9 AC1900 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
MAC Address: The connected wireless station's MAC address

Current Status: The connected wireless station's running status, one of

STA-ASSOC/ STA-JOINED/ WPA/ WPA-PSK/ WPA2/ WPA2-PSK/ AP-UP/ AP-DOWN/ Disconnected
Received Packets: Packets received by the station

Sent Packets: Packets sent by the station

Click on the Refresh button to update this page.

4.10 Guest Network

There are four submenus under the Guest Network menu: Basic Settings 2.4GHz, Basic
Settings 5GHz, Guest Status 2.4GHz and Guest Status 5GHz. Click any of them, and you will
be able to scan or configure the corresponding function. The detailed explanations for each
submenu are provided below.

4.10.1 Basic Settings 2.4GHz

Choose menu "Guest Network""Basic Settings 2.4GHz", and you will see the screen as
shown in Figure 4-51. This feature allows you to create a separate network for your guests without
allowing them to access your main network and the computers connected to it.
Guest Network: Check this box to enable 2.4GHz Guest Network. And you can set wireless

parameters for 2.4GHz guest network as shown in Figure 4-52.
Figure 4-50
Figure 4-51
63
STA-AUTH/