The Back Panel - TP-Link Archer D9 User Manual

Archer D9 AC1900 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
1.3.2

The Back Panel

The following parts are located on the rear panel (View from left to right).
ADSL: Through the port, you can connect the telephone to the modem router. Or you can

connect them by an external separate splitter. For details, please refer to
Modem Router.
WPS: The switch for the WPS function. For details, please refer to

WiFi ON/OFF: The switch for the WiFi function. Press it to enable/disable the WiFi function.

USB 3.0: The USB 3.0 port connects to a USB 3.0 storage device or a USB 3.0 printer.

LAN1, LAN2, LAN3, LAN4/WAN: Through these ports, you can connect the modem router to

your PC or other Ethernet network devices. In wireless router mode you will be able to
connect to Cable/FTTH/VDSL/ADSL devices.
POWER ON/OFF: The switch for the power.

POWER: The Power plug is where you will connect the power adapter.

Antennas: Used for wireless operation and data transmit.

The following parts are located on the side panel (View from top to bottom).
USB 2.0: The USB 2.0 port connects to a USB 2.0 storage device or a USB 2.0 printer.

RESET: There are two ways to reset the modem router's factory defaults.

Figure 1-2
6
2.3 Connecting the
4.8.2 WPS Settings.