Fax Transmission Procedure - Panasonic DP-C406 Operating Instructions Manual

Fax Transmission Procedure

You can send originals via a telephone line by simply entering the fax number using the Keypad or the
Address Book.
The basic procedure of transmitting a fax on this machine is as follows.
The Facsimile function is available only when the optional G3 Fax Communication Board is installed.
1
Place original(s).
Face up. Up to 100 sheets (80 g/m
A4)
Face down. Align with the top left
corner. Close ADF.
Refer to Placing Originals (See page 14).
If the available memory is not sufficient,
Memory transmission may not be possible.
If this happens, use Direct transmission
instead. Refer to Direct Transmission (See
page 46).
18
2
Press the Fax key to open the Fax
screen.
2
/
Select "Basic Menu" if additional settings
are required.
Setting Original Quality (see page 33)
Setting the Original Size (see page 36)
Transmitting 2-Sided Originals (see page
38)
Job Build and SADF (see page 44)
Verification Stamp (see page 40)
Transmitting a Document Stored in
Memory (see page 42)
Direct Transmission (see page 46)
Verifying Communication Status (see
page 48)
Used Memory