Fax Transmission Procedure - Panasonic DP-C266 Operating Instructions Manual

Fax Transmission Procedure

You can send originals via a telephone line by simply entering the fax number using the Keypad or the
Address Book.
The basic procedure of transmitting a fax on this machine is as follows.
The Facsimile function is available only when the optional G3 Fax Communication Board is installed.
1
Place original(s).
Face up. Up to 100 sheets
(20 lb/Letter)
Face down. Align with the top
left corner. Close ADF.
Refer to Placing Originals (see page 14).
If the available memory is not sufficient,
Memory transmission may not be possible.
If this happens, use Direct transmission
instead. Refer to Direct Transmission (see
page 48).
18
2
Press the Fax key to open the Fax
screen.
Select "Basic Menu" if additional
settings are required.
Used memory
Setting Original Quality (see page 34)
Setting the Original Size (see page 38)
Transmitting 2-Sided Originals (see page
40)
Job Build and SADF (see page 46)
Verification Stamp (see page 42)
Transmitting a Document Stored in
Memory (see page 44)
Direct Transmission (see page 48)
Verifying Communication Status (see
page 50)