Setting Subject
Every time you send an Email, you can enter its subject manually. To enter a subject, follow the steps
below.
The default subject is preset if the Function Parameter "21 Default Subject" (Fax/Email Settings > User
Parameters) has been set. For programming instructions, refer to Fax/Email Settings in the Operating
Instructions (For Function Parameters) of provided CD-ROM.
1
On the Email screen, select "Subject".
(See pages 111 and 120)
2
Enter a subject, and then select "OK".
1
The subject field is up to 40 characters in
length.
For instructions on using the onscreen
Keyboard, refer to Using the keyboard in
the Operating Instructions (For Function
Parameters) of provided CD-ROM.
If you make a mistake, select "Back Space"
to delete one character at a time, or move
the cursor to the beginning of the field, and
then press the Clear key to delete the entire
entry.
3
2
Press the Start key.
The original(s) are stored into memory with a
file number. Then the Email transmission
starts.
123