Panasonic DP-C406 Operating Instructions Manual page 21

Fax number entry is also possible from the
"Number Pad" in the Address Book
screen, instead of the Control Panel
Keypad.
Number Pad Screen
Inserts a pause each time it is
selected. The pause is
represented by a "-" symbol.
Used to access some features
of your PBX.
Select when entering a sub-
address number.
The sub-address is represented
by an "s" symbol.
Select when entering additional
destinations.
Do not select "Set" for a
single destination.
Select "Clear" to delete an
erroneous entry, one digit at a
time.
Using "Redial/Pause"
If you are using a PBX, enter the external
access number first, and then select
"Redial/Pause" before entering the fax
number.
Ex: Enter 9 for the outside access number,
select "Redial/Pause", and then enter the
fax number.
Pause symbol
Using " "
This feature is available in certain countries
only.
A "/" symbol appears when the dialling
method is changed from "Pulse" to "Tone".
The standard setting for "06 Dialling
Method" is "Tone".
Ex: After entering 9, select " " to switch to
tone dialling.
Tone symbol
Using "Sub-Address"
Select "Sub-Address" to enter a sub-
address destination after the fax number.
Refer to Sub-Addressed Transmission
Using Manual Dialling (see page 76).
Ex: After entering 4, select "Sub-Address",
and then enter the Sub-address.
Sub-address symbol
3
Press the Start key.
The original(s) are stored into memory with a
file number. Then starts dialling the telephone
number.
21