Power Failure - Panasonic DP-C406 Operating Instructions Manual

Power Failure

Power Failure
The fax display remains off for the duration of a power failure, and you cannot send or receive
documents.
FAX When a power failure
occurs
While a power failure
persists
When power recovers
When External • When a power
Telephone is failure occurs
connected
• While a power failure
persists
If a power failure occurs while scanning a document, the scan is cancelled. Rescan the document when power
recovers. If a power failure occurs while sending a document from memory, the fax or document will be resent
immediately upon recovery.
The notice above only applies when the machine is connected to the Public Telephone Network. Please check
the specification of PBX, if it is connected to it.
Problem
Send a fax.
Receive a fax.
Send a fax.
Receive a fax.
Send a fax.
Memory content.
Data pre-programmed or preset
on your machine.
• You are talking to a remote
party.
• Make phone calls. Receiving
phone calls.
Condition
The fax transmission is aborted.
Resend when power recovers.
The fax reception is aborted.
Ask the remote party to resend
when power recovers.
You cannot send a fax.
You cannot receive a fax.
The fax transmission is start
again when power recovers, if
there is transmission data in
memory.
Transmission and transmission
data stored in memory is
preserved intact.
Data pre-programmed or preset
in the address book, and on
program dialling, Function
Parameters are preserved
through the power failure.
Please confirm the specification
of your external telephone.
221