Setting Password-Protected Transmission - Panasonic DP-C406 Operating Instructions Manual

Setting Password-Protected Transmission

To always utilize Password-protected transmissions, follow the steps below.
You must program a password (4 digits) in advance.
1
Press the Function key to open the
Function Parameters screen.
2
Select "Fax/Email Settings".
3
Select "04 Key Operator Mode".
4
Enter the Key Operator password, and
then select "OK".
1
If you make a mistake, press the Clear key
or select "Back Space" to delete.
2
5
Select "01 Fax Parameters".
6
Select "40-79".
You can also proceed to step 8 by entering
43 with the Keypad and pressing the Start
key.
81