Settings For Inbound Routing - Panasonic DP-C406 Operating Instructions Manual

Settings for Inbound Routing

To use the Inbound Routing feature, program the following parameters to meet the type of routing in
Function Parameters (Fax/Email Settings > Fax Parameters):
Routing Type
Routing by sub-addressing Set this parameter to perform an ITU-T sub-
Routing by the numeric ID
of a sending fax station
To set the From field
To program printout of
received documents
For more operational details, refer to Fax/Email Settings in the Operating Instructions (For Function
Parameters) of provided CD-ROM.
Explanation
address query within its auto dialler, and to route
the received document(s) to corresponding
station's Email address(es) or telephone
number(s).
Set this parameter to perform a numeric ID (TSI
frame information) query within its auto dialler, and
to route the received document(s) to the
corresponding station's Email address(es) or
telephone number(s).
Use this parameter to select the type of Email
header to be included in the "From" field of each
routed faxes.
• Originator (Origi):
The originating fax machine's TSI will appear in
the "From" field of the routed Email.
• Relay Station (Rly Stn):
The routing station's Email address will appear
in the "From" field of the routed Email.
Select whether to print all documents received on
this machine ("Always"), or print them only if
inbound routing fails ("Inc Only").
Function Parameters
Set "152 Sub-Addr
Routing" to "Valid".
Set "153 TSI Routing" to
"Valid".
Program "154 Route
Header FMT".
Program "155 Print Routed
Doc".
141