Actions
Step 8
Make sure the redrive rollers are free of debris. Check for wear or damage.
Are they free of wear or damage?
Step 9
a
Remove the left cover.
b
Perform a duplex print test:
Diagnostics Menu > Cont Prt Duplex Tray 1
Note: Press
when the first page picks to prevent printing
additional pages.
c
Observe the reverse solenoid for proper operation.
Does it properly operate?
Step 10
Make sure the input roller/deskew assembly is free of debris. Check for
wear or damage.
Are they free of wear or damage?
Streaked horizontal or vertical lines appear on prints
ABCDE
ABCDE
ABCDE
Leading edge
ABCDE
ABCDE
ABCDE
Trailing edge
Yes
Go to step 9.
Go to step 10.
Contact the next level
of support.
Diagnostic information
54
4514-220, -230
No
Replace the redrive
assembly. See
"Redrive
assembly removal" on
page
209.
Replace the reverse
solenoid. See
"Reverse
solenoid removal" on
page
152.
Replace the printer.