250 Paper Jams; X]‑Page Jam, Clear Manual Feeder. [250.Xx - Lexmark MS310 Series Service Manual

Action
Step 7
Check the ACM assembly.
Is it free of wear or damage?
Step 8
POR into the Diagnostics menu and perform a print test:
Diagnostics Menu > Cont Prt Simplex Tray 2
Does the pick/lift motor gearbox pass the test?
Step 9
Does the error remain?

250 paper jams

25y.xx paper jam messages
Error code Description
250.06 Input sensor did not detect sheet picked from MPF.
No other sheets should be in the path.
250.10 Input sensor did not detect sheet picked from MPF.
No other sheets should be in the path.
250.13 Input sensor did not detect sheet picked from MPF.
Sheet also last page of stapled job.
250.14 Input sensor did not detect sheet picked from MPF.
Other sheets should have been flushed.
250.17 Input sensor did not detect sheet picked from MPF.
No other sheets should be in the path.
250.18 Input sensor did not detect sheet picked from
MPF. Other sheets could be in the path.
[x]‑page jam, clear manual feeder. [250.xx]
1
From the multipurpose feeder, firmly grasp the jammed paper on each side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
Yes
Go to step 8.
Go to step 9.
Contact the next level
of support.
Action
Go to "MPF service check" on page
Diagnostic information
82
4514-220, -230
No
Replace the ACM
assembly. See "ACM
assembly removal" on
page 216.
Replace the option
tray.
The problem is solved.
83.