7
Remove the two screws (C) securing the control panel assembly.
8
Route all cables off the printer to completely remove the control panel assembly.
UICC removal
1
Remove the right cover. See
2
Remove the nameplate. See
3
Remove the bezel. See
4
Remove the control panel assembly. See
5
Remove the three screws (A), and then remove the UICC.
Note: The control panel buttons must remain with the control panel assembly.
"Right cover removal" on page
"Nameplate removal" on page
"Bezel removal" on page
"Control panel assembly removal" on page
Repair information
C
160.
174.
173.
A
176
4514-220, -230
174.