Adjusting Effect Settings; Saving Performances You Create - Roland XV-2020 Owner's Manual

PART SCALE TUNE
One set of Scale Tune settings can be created in Performance mode.
* The selected scale applies to MIDI messages received from an external MIDI device as well as to local sound
generation.
Parameter
SCALE TUNE SWITCH
KEY C–B SCALE
PERFORM MFX (Performance Multi-effects)
Parameter
TYPE
(Multi-Effects Type)
SEND LEVEL DRY
(Multi-Effects Dry Send Level)
SEND LEVEL CHO
(Multi-Effects Chorus Send Level)
SEND LEVEL REV
(Multi-Effects Reverb Send Level)
CONTROL SOURCE 1–4
(Multi-Effects Control Source1–4)
DESTINATION 1–4
(Multi-Effects Control Destination 1–4)
SENS 1–4
(Multi-Effects Control Sensitivity 1–4)
PERFORM CHORUS (Performance Chorus)
Parameter
TYPE
(Chorus Type)
LEVEL
(Chorus Level)
OUTPUT SELECT
(Chorus Output Assign)
SOURCE
(Multi-Effects Source)
PERFORM REVERB (Performance Reverb)
Parameter
TYPE
(Reverb Type)
LEVEL
(Reverb Level)
SOURCE
(Multi-Effects Source)

Adjusting Effect Settings

Refer to Multi-Effects Parameters (p. 82).

Saving Performances You Create

Refer to Saving a Sound You Create (p. 92).
Value Description
OFF, ON The XV-2020 allows you to use temperaments other than equal temperament. Turn this on when
you wish to use a tuning scale other than equal temperament.
-64–+63 Adjusts the pitch of each note in one-cent steps (1/100th of a semitone) relative to its equal-tem-
pered pitch.
Value
Refer to p. 80.
Description
Refer to p. 80.
Description
Refer to p. 80.
Creating a Performance
75