Roland XV-2020 Owner's Manual page 86

Using the XV-2020 Effects
17: STEREO DELAY
This is a stereo delay.
When Mode is NORMAL:
fig.02-017am
Balance D
L in
Delay
Feedback
Feedback
Delay
R in
Balance D
When Mode is CROSS:
fig.02-017bm
Balance D
L in
Delay
Feedback
Feedback
Delay
R in
Balance D
Parameter Value
Delay L 0.0-500.0 ms
Delay R
Feedback # -98-+98 %
Mode NORMAL,
CROSS
HF Damp 200-8000 Hz,
BYPASS
Phase L NORMAL,
INVERT
Phase R
Low Gain -15-+15 dB
High Gain -15-+15 dB
Balance # D100:0W-
D0:100W
Level 0-127
86
2-Band
L out
EQ
Balance W
Balance W
2-Band
R out
EQ
2-Band
L out
EQ
Balance W
Balance W
2-Band
R out
EQ
Description
Adjusts the time until the delay
sound is heard.
Adjusts the amount of the delay
sound that's fed back into the effect.
Negative (-) settings invert the
phase.
Selects the way in which delay
sound is fed back into the effect. (See
the figures above.)
Adjusts the frequency above which
sound fed back to the effect is fil-
tered out. If you don't want to filter
out any high frequencies, set this pa-
rameter to BYPASS.
Phase of the delay sound
Gain of the low frequency range
Gain of the high frequency range
Volume balance between the direct
sound (D) and the delay sound (W)
Output level
18: MODULATION DELAY
Adds modulation to the delayed sound, producing an effect similar
to a flanger.
When Mode is NORMAL:
fig.02-018am
Balance D
L in
Delay
Modulation
Feedback
Feedback
Delay
Modulation
R in
Balance D
When Mode is CROSS:
fig.02-018bm
Balance D
L in
Delay Modulation
Feedback
Feedback
Delay Modulation
R in
Balance D
Parameter Value
Delay Left 0.0-500.0 ms
Delay Right
Feedback -98-+98 %
Mode NORMAL,
CROSS
HF Damp 200-8000 Hz,
BYPASS
Rate # 0.05-10.00 Hz
Depth 0-127
Phase 0-180 deg
Low Gain -15-+15 dB
High Gain -15-+15 dB
Balance # D100:0W-
D0:100W
Level 0-127
2-Band
L out
EQ
Balance W
Balance W
2-Band
R out
EQ
2-Band
L out
EQ
Balance W
Balance W
2-Band
R out
EQ
Description
Adjusts the time until the delay sound
is heard.
Adjusts the amount of the delay sound
that's fed back into the effect. Negative
(-) settings invert the phase.
Selects the way in which delay sound
is fed back into the effect (See the fig-
ures above.)
Adjusts the frequency above which
sound fed back to the effect is filtered
out. If you don't want to filter out any
high frequencies, set this parameter to
BYPASS.
Frequency of modulation
Depth of modulation
Spatial spread of the sound
Gain of the low frequency range
Gain of the high frequency range
Volume balance between the direct
sound (D) and the delay sound (W)
Output level