FreeMIDI settings
1.
Use the USB cable to connect the XV-2020 and your Macintosh.
fig.USB-02.e
Computer
* If using a computer that is not equipped with a USB connector, refer to p. 30.
fig.fm-03.e.eps_50
2.
Open the "FreeMIDI Applications" folder, and double-click the
"FreeMIDI Setup" icon.
3.
The first time FreeMIDI is started up, a "Welcome to FreeMIDI!" dialog box will
appear. Click [Continue].
If this is the second or later time, select "FreeMIDI Preferences" from the File menu.
fig.fm-04_60
4.
In the "FreeMIDI Preferences" dialog box,
check "XV-2020 Port" which is located
below XV-2020 Driver in MIDI
Configuration, and click [OK].
fig.fm-05_65
5.
The About Quick Setup dialog box appears.
Click [Continue].
fig.fm-06_60
6.
In the dialog box that appears, select the "XV-
2020" in "Studio Location," and click
[>>Add>>].
fig.fm-07.e.eps_70
7.
When settings are complete, click [Done].
A setting window like the following appears.
fig.fm-08_70
8.
From the File menu, select [Save], and save your settings.
This completes connections for the XV-2020 and Macintosh, and installation of the
MIDI driver. Now, MIDI data can be input and output (recorded and played).
USB cable
XV-2020
For Those Using a Computer
To prevent malfunction
and/or damage to speakers
or other devices, always
turn down the volume, and
turn off the power on all
devices before making any
connections.
If you are using the XV-
2020 with a sequencer, do
not disconnect the MIDI
cable connected to the XV-
2020 while a song is
playing back.
There will be a version
number following
"FreeMIDI Setup" as the
actual icon name.
If the dialog box does not
show "XV-2020 Driver,"
check whether the XV-2020
is connected correctly, and
start up FreeMIDI Setup
once again.
If the "About Quick
Setup" dialog box is not
displayed, select "Quick
Setup..." from the
"Configuration" menu.
29