Midi Implementation - Roland XV-2020 Owner's Manual

MIDI Implementation

Model: XV-2020
Date: 2002.6.4
Version: 1.00
1. Receive data
Channel Voice Messages
* Not received in Performance mode when the Receive Switch parameter (Performance
Part) is OFF.
Note off
Status 2nd byte
8nH kkH
9nH kkH
n = MIDI channel number:
kk = note number:
vv = note off velocity:
* Not received when the Envelope Mode parameter (Patch Tone and Rhythm Tone) is NO-
SUS.
Note on
Status 2nd byte
9nH kkH
n = MIDI channel number:
kk = note number:
vv = note on velocity:
Polyphonic Key Pressure
Status 2nd byte
AnH kkH
n = MIDI channel number:
kk = note number:
vv = Polyphonic Key Pressure:
* Not received in Performance mode when the Receive Poly Key Pressure parameter
(Performance MIDI) is OFF.
Control Change
* If the corresponding Controller number is selected for the Patch Control Source 1, 2, 3 or
4 parameter (Patch Common), the corresponding effect will occur.
* If a Controller number that corresponds to the System Control Source 1, 2, 3 or 4
parameter (System Common) is selected, the specified effect will apply if Patch Control
Source 1, 2, 3 or 4 parameter (Patch Common) is set to SYS-CTRL1, SYS-CTRL2, SYS-
CTRL3 or SYS-CTRL4.
Bank Select (Controller number 0, 32)
Status 2nd byte
BnH 00H
BnH 20H
n = MIDI channel number:
mm, ll = Bank number:
* Not received in Performance mode when the Receive Bank Select (Performance MIDI) is
OFF.
* The Performances, Patches, and Rhythms corresponding to each Bank Select are as
follows.
* The SRX series corresponding to each Bank Select are to see the SRX series owner's
manual.
+—————+———————————+———————————+——————————————————————+———————————+
| BANK SELECT | PROGRAM | GROUP
| MSB | LSB | NUMBER |
+—————+———————————+———————————+——————————————————————+———————————+
| 085 | 000 | 001 — 064 | User Performance
| | 064 | 001 — 032 | Preset Performance A | 001 — 032 |
| | 065 | 001 — 032 | Preset Performance B | 001 — 032 |
| | : | | :
| 086 | 000 | 001 — 004 | User Rhythm
| | 064 | 001 — 002 | Preset Rhythm A
| | 065 | 001 — 002 | Preset Rhythm B
| | : | | :
| 087 | 000 | 001 — 128 | User Patch
| | 064 | 001 — 128 | Preset Patch A
| | 065 | 001 — 128 | Preset Patch B
| | : | | :
| 092 | 000 — | 001 — | SRX Rhythm
| | : | | :
| 093 | 000 — | 001 — | SRX Patch
| | : | | :
| 120 | | 001 — 057 | GM Rhythm
| 121 | 000 — | 001 — 128 | GM Patch
+—————+———————————+———————————+——————————————————————+———————————+
136
3rd byte
vvH
00H
0H - FH (ch.1 - 16)
00H - 7FH (0 - 127)
00H - 7FH (0 - 127)
3rd byte
vvH
0H - FH (ch.1 - 16)
00H - 7FH (0 - 127)
01H - 7FH (1 - 127)
3rd byte
vvH
0H - FH (ch.1 - 16)
00H - 7FH (0 - 127)
00H - 7FH (0 - 127)
3rd byte
mmH
llH
0H - FH (ch.1 - 16)
00 00H - 7F 7FH (bank.1 - bank.16384)
| NUMBER |
| |
| 001 — 064 |
| |
| 001 — 004 |
| 001 — 004 |
| 001 — 004 |
| |
| 001 — 128 |
| 001 — 128 |
| 001 — 128 |
| |
| 001 — |
| |
| 001 — |
| |
| 001 — 009 |
| 001 — 256 |
Modulation (Controller number 1)
Status 2nd byte
BnH 01H
n = MIDI channel number:
vv = Modulation depth:
* Not received in Performance mode when the Receive Modulation parameter
(Performance MIDI) is OFF.
Breath type (Controller number 2)
Status 2nd byte
BnH 02H
n = MIDI channel number:
vv = Control value:
Foot type (Controller number 4)
Status 2nd byte
BnH 04H
n = MIDI channel number:
vv = Control value:
Portamento Time (Controller number 5)
Status 2nd byte
BnH 05H
n = MIDI channel number:
vv = Portamento Time:
* In Performance mode the Part Portament Time parameter (Performance Part) will
change.
Data Entry (Controller number 6, 38)
Status 2nd byte
BnH 06H
BnH 26H
n = MIDI channel number: 0H - FH (ch.1 - 16)
mm, ll = the value of the parameter specified by RPN/NRPN
mm = MSB, ll = LSB
Volume (Controller number 7)
Status 2nd byte
BnH 07H
n = MIDI channel number:
vv = Volume:
* Not received in Performance mode when the Receive Volume parameter (Performance
MIDI) is OFF.
* In Performance mode the Part Level parameter (Performance Part) will change.
Balance (Controller number 8)
Status 2nd byte
BnH 08H
n = MIDI channel number:
vv = Balance:
Panpot (Controller number 10)
Status 2nd byte
BnH 0AH
n = MIDI channel number:
vv = Panpot:
* Not received in Performance mode when the Receive Pan parameter (Performance
MIDI) is OFF.
* In Performance mode the Part Pan parameter (Performance Part) will change.
Expression (Controller number 11)
Status 2nd byte
BnH 0BH
n = MIDI channel number:
vv = Expression:
* Not received when Tone Receive Expression parameter (Patch Tone or Rhythm Tone) is
OFF.
* Not received in Performance mode when Receive Expression parameter (Performance
MIDI) is OFF.
3rd byte
vvH
0H - FH (ch.1 - 16)
00H - 7FH (0 - 127)
3rd byte
vvH
0H - FH (ch.1 - 16)
00H - 7FH (0 - 127)
3rd byte
vvH
0H - FH (ch.1 - 16)
00H - 7FH (0 - 127)
3rd byte
vvH
0H - FH (ch.1 - 16)
00H - 7FH (0 - 127)
3rd byte
mmH
llH
3rd byte
vvH
0H - FH (ch.1 - 16)
00H - 7FH (0 - 127)
3rd byte
vvH
0H - FH (ch.1 - 16)
00H - 7FH (0 - 127)
3rd byte
vvH
0H - FH (ch.1 - 16)
00H - 40H - 7FH (Left - Center - Right),
3rd byte
vvH
0H - FH (ch.1 - 16)
00H - 7FH (0 - 127)