Roland XV-2020 Owner's Manual page 49

PATCH & VELOCITY KEY RANGE
PATCH VELOCITY RANGE
* Parameters that can be set independently for each Tone are indicated by "#."
Parameter
VELOCITY CONTROL
(TMT Velocity Control)
TMT CONTROL SW
(TMT Control Switch)
FADE LOWER#
(TMT Velocity Fade Width Lower)
LOWER#
(TMT Velocity Range Lower)
UPPER#
(TMT Velocity Range Upper)
FADE UPPER#
(TMT Velocity Fade Width Upper)
PATCH KEY RANGE
* Parameters that can be set independently for each Tone are indicated by "#."
Parameter
FADE LOWER#
(TMT Key Fade Width Lower)
LOWER#
(TMT Key Range Lower)
UPPER#
(TMT Key Range Upper)
FADE UPPER#
(TMT Key Fade Width Upper)
Value Description
OFF, ON, RANDOM Determines whether Velocity messages from a MIDI keyboard or sequenc-
er are recognized (ON), or ignored (OFF). When set to RND, the Patch's
constituent Tones sound randomly, regardless of any Velocity messages.
OFF, ON This setting determines whether or not the TMT is controlled by the Ma-
trix Control. When TMT Velocity Control is set to OFF, turning this pa-
rameter on and off is a simple way to switch between playing all Tones or
controlling them with the Matrix Control, making this an effective tool for
auditioning Tones.
[What is a TMT?]
With the XV-2020, you can set each Tone's expression range, or "key
range." You can also change the way the Tone responds to the force, or
"velocity," with which a key is pressed. These settings are collectively re-
ferred to as the TMT.
0–127 Determines what happens to the Tone's level when the Tone is played at
a velocity lower than its specified velocity range. Higher settings result in
a more gradual change in volume. If you don't want notes played below
the specified velocity range to be heard at all, set this to 0.
1–UPPER Sets the lowest velocity at which the Tone sounds.
LOWER–127 Sets the highest velocity at which the Tone sounds.
* It is not possible to set the Lower value higher than the Upper value, or the Up-
0–127 Determines what happens to the Tone's level when the Tone is played at
a velocity greater than its specified velocity range. Higher settings result
in a more gradual change in volume. If you don't want notes played above
the specified velocity range to be heard at all, set this to 0.
1
Value Description
0–127 Determines what happens to the Tone's level when a note that's lower than the Tone's
specified keyboard range is played. Higher settings result in a more gradual change in
volume. If you don't want the Tone to sound at all when a note below the keyboard
range is played, set this parameter to 0.
C-1–UPPER Specifies the lowest note that causes the Tone to sound.
LOWER–G9 Specifies the highest note that causes the Tone to sound.
* The Lower value cannot be set to a value greater than Upper value, or vice versa.
0–127 Determines what happens to the Tone's level when a note that's higher than the Tone's
specified keyboard range is played. Higher settings result in a more gradual change in
volume. If you don't want the Tone to sound at all when a note above the keyboard
range is played, set this parameter to 0.
Level
0
Lower
L.Fade value
per value below the Lower value.
Level
Lower
Upper
L.Fade value
U.Fade value
Key number
127
Upper
U.Fade value
Creating a Patch
Velocity
49