Blinks Error Code - Panasonic TC-P42X1 Revised Troubleshooting Handbook

8 Blinks Error Code (Full-HD Models)
If the power LED continues to blink even after the TV is unplugged, press and hold the power
switch on the TV for a few seconds until the LED turns off.
Trouble Mode
Driver SOS3/SS_FPC_Detect
42" Full HD Models (TC-P42S1 - TC-P42G10 – TC-P42U1 – TC-42PS14).
that connectors SS61, SS64, and SS21 on the SS board and connectors SS24, and
SS58 on the SS2 board are properly seated.
46" Full HD Models (TC-P46S1 - TC-P46G10 - TC-P46U1).
connectors SS61, SS63, SS64, and SS21 on the SS board and connectors SS24, and
SS58 on the SS2 board are properly seated.
50" and 54" Full HD Models
TC-50PS14 – TC-P54S1 – TC-54G10). Make sure that connectors SS53, SS55, SS56,
and SS21 on the SS board and connectors SS24, and SS58 on the SS2 board are
properly seated.
42" FHD
Defective Board
SS, A, SS2, P, and Loose connections
(TC-P50S1 – TC-P50G10 – TC-P50U1 – TC-P50V10 –
46" FHD
Make sure
Make sure that
Warning: Disconnect AC Power prior
to making any disconnection or
connection.
Note: D280 (D16280 on the Service
Manual) is located less than inch away
from the right side of connector SS33
D280
(D16280)
50" & 54"
FHD
ANODE
CATHODE
Slide #54