10 Blinks Error Code (HD Models)
If the power LED continues to blink even after the TV is unplugged, press and hold the power
switch on the TV for a few seconds until the LED turns off.
B
A
Trouble Mode
F-STB15V, SUB9V, SUB5V, BT30V
Make sure that connectors P6/A6 is properly seated
C
D
D
Defective Board
A, P, Loose connections
B
Warning: Disconnect AC Power prior to
making any disconnection or connection.
IMPORTANT:
generations, there's no 10 blinks error
code at plug-in for 2009 models.
When the A board is replaced, the TV
turns on in aging mode by itself at
plug in.
D
What can possibly cause 10
blinks
A.
B.
C.
C
D.
E.
Unlike previous
Missing/Shorted F_15V
Shorted Vsus
Missing/Shorted SUB5V,
SUB9V, BT30V.
IC1100, IC9003, IC9004
Possibly SU and SD boards
Slide #57