Omron E5C series User Manual page 86
Digital temperature controllers
Hide thumbs
Also See for E5C series:
- User manual (372 pages) ,
- Connection manual (60 pages) ,
- User manual (440 pages)
Table of Contents
Advertisement
2 Preparations
• Bottom-panel Port
1
Connect the E58-CIFQ2
USB-Serial Conversion Cable
to the E58-CIFQ2-E
Conversion Cable.
2
Connect the plug on the
Conversion Cable to the
bottom-panel Setup Tool
port.
Precautions for Correct Use
• Hold the connector when inserting or disconnecting the Cable.
• When connecting a connector, always make sure that it is oriented correctly. Do not force the
connector if it does not connect smoothly. Connectors may be damaged if they are connected
with excessive force.
• Do not connect cables to both ports at the same time. Damage or malfunction may occur.
2 - 52
E58-CIFQ2
USB-Serial Conversion Cable
Align the arrow (
) on the small connector on the E58-CIFQ2 USB-Serial
Conversion Cable with the triangle mark (
E58-CIFQ2-E Conversion Cable.
Conversion cable
E5@C Digital Temperature Controllers User's Manual (H174)
E58-CIFQ2-E
Conversion Cable
There is a triangle
on the connecting surface.
) on the small connector on the
Advertisement
Table of Contents
